22nd May 2021

Online Workshop on Introduction to PTC CREO, its capabilities and Overview :
The objective of this workshop
  • The aim of this workshop is to deliver a live demonstration in PTC CREO covering sketch-Modeling-Assembly-Detailing and also to highlight the new features and modules available in PTC CREO Version 7.0 which also enhances the recent applications of tool in augmented reality and other Industry 4.0 requirements.
Workshop Highlights:
  • Around 85 participants took part in this online workshop including students, faculty and various program directors. The guest speaker presentation was interactive with live demonstration and the interaction with participants focused on additive manufacturing, flow design, PLM, fracture mechanics, structural analysis and advantage of using CREO software for industry requirement.

​28th, 29th February & 1st March 2020

One Day National Level Workshop on ‘Integrated CAD – CAM through Solidworks’ :
The objective of this workshop
  • The aim of this workshop is to create awareness among the students, of the importance of surface modelling in the CAD sector. Also to get the students to gain 1st hand experience in 3D printing technology. 
Workshop Highlights:
  • Surface modelling was a new subject to the students who already have extensive knowledge in solid modelling. A demonstration on surface modelling and 3-D printing was done. After the demonstration, students were encouraged and assisted for doing their own surface models.

​3rd July 2019

One Day National Level Workshop on Industry 4.0 : Smart Manufacturing System
The objective of this workshop
  • The purpose of the workshop was to make the aspiring engineers acquainted with the conceptual as well as practical knowledge from the latest technological being used in the field of Indutry 4.0.
Workshop Highlights:
  • To make the workshop in new way of Learning by doing, participant were kept active by doing group activities, Collecting data, Storing in cloud, downloading the data and analysing the data were major activities done. Application from Google platform like Google fit, Google maps, etc., were used.

​16th November 2018

Awareness workshop on Certified Six Sigma Green Belt (CSSGB) / Project Engineering & Managerial Statistics (PEMS)
The objective of this workshop
  • Comprehend the concept of Lean and its principles
  • Learn and understand Lean tools and methods
  • Classify roles and responsibility of various team members
  • Understanding significance of implementing Lean principles in an organization
  • Case studies to understand theoretical and practical knowledge of Lean principles
  • Impediments while applying lean principles in a process and solutions for the same
Workshop Highlights:
  • Proficiency in Lean principles, terminology and concepts
  • Hands on knowledge of using tools learnt through simulations
  • Ability to implement the concepts in process improvement

2nd August 2018

One Day Workshop on Lean Six Sigma Manufacturing
The objective of this workshop
  • Comprehend the concept of Lean and its principles
  • Learn and understand Lean tools and methods
  • Classify roles and responsibility of various team members
  • Understanding significance of implementing Lean principles in an organization
  • Case studies to understand theoretical and practical knowledge of Lean principles
  • Impediments while applying lean principles in a process and solutions for the same
Workshop Highlights
  • Proficiency in Lean principles, terminology and concepts
  • Hands on knowledge of using tools learnt through simulations
  • Ability to implement the concepts in process improvement​

31st July & 1st August 2018

Two Days workshop on Auto Surgeons
The objective of this workshop
  • .To understand the Concepts of assembling and dismantling of Automobile especially two wheeler engine and four wheeler engine
  • To enrich the knowledge on how to overhaul the engines
  • Hands on Training.  
Workshop Highlights:
  • Complete Disassembly of Car engine.
  • Hands on experience on each component of car engine
  • Modern assistance in emergency.
  • Lecture on Advance Technologies in Automobiles
  • Discussion on Vehicle Maintenance & Diagnostic
  • Complete offline video assistance
  • Modern car to car communications 

12th April 2018

National Level Practical Workshop on Computational Fluid Dynamics Methods & Applications for Beginners
Approaches, Applications and other theoretical concepts were handled by Dr. Christopher from SSE. He discussed the applications and relevance of the CFD in the modern day research and also discussed on various research aspects and the scope of the tool.
Subsequently the hands-on session was taken over by out invited guest Dr. R. Manimaran from VIT, Chennai. Dr. Manimaran discussed the use of the Ansys software. The participants were given a hands-on experience on how to use the software by utilizing the Lab facilities of SSE. The participants along with the resource person were involved in problem solving session using the software and were keenly interacting at regular interval to clarify their doubts.

5th April 2018

One Day National Level Pre-conference Workshop on NDT Techniques for Evaluation of Casting & Welding Structures
The purpose of the workshop is to focus on various Non-Destructive testing and evaluation techniques that are being used for detection and characterization of defects, evaluation of residual stress and assessment of microstructure of mechanical components and for casting & welding structures in particular.
On successful completion of Workshop based on content, relevant examples, interaction, overall organization and effectiveness this workshop secured excellent feedback from participants.

​27th - 28th February 2018

The 21st Century Challenges and Opportunities in Development of Sustainable Energy Systems
The objective of this program is to create awareness among students and faculties about the energy demand, energy conversion technologies and smart grid applications. The programme also aimed to familiarize participants with the emerging ideas and trends on challenges and opportunities in Sustainable Energy Systems in the 21st century contexts. Experts from various energy conversion technologies had delivered a lecture and interacted with students. They focused on different energy conversion technologies such as solar, biomass, wind and coal.

​21st February 2018

One Day National Level Hands-on workshop on NDT Methods & Techniques
The purpose of the workshop was to make the aspiring engineers & faculties familiar with the conceptual as well as practical knowledge of the Latest Inspection Technological being used in the manufacturing Industries. Nowadays, the NDT Methods & Techniques involved in all the Engineering discipline. On successful completion of Workshop the based on content, relevant examples, interaction, hands-on training overall organization and effectiveness this workshop scored 4.75 of 5.0 in feedback from participants.

​9th-10th February 2018

Two Days International workshop on Composite Materials
The objective of this workshop was to understand the Concepts of modern composite materials, to enrich the knowledge on how to fabricate and carry out the standard mechanical test on the Composites and to have a Hands on Training. The resource person for the program was Dr. Mohamed Thariq Bin Haji Hameed Sultan, presently working as a Head, Laboratory Bio Composite Technology, Institute of Tropical Forestry and Forest Product and also Associate professor in the Department of Aerospace Engineering, Universiti Putra Malaysia, Selangor.

1st February 2018

One Day National Level Hands-on Workshop on Industrial Automation and Mechatronics for Beginners
The purpose of the workshop was to make the aspiring engineers & faculties acquainted with the conceptual as well as practical knowledge of the Latest Technological being used in the Industries. The Hands-on session triggered students in beginners level to explore more about Arduino Circuit and programming it. On successful completion of Workshop the Society of Automation and Mechatronics Engineers certified the student participants. Based on content, relevant examples, interaction, overall organization and effectiveness this workshop scored 4.486 of 5.0 in feedback from participants

29th-30th November 2017

Two Days Orientation workshop on India Design Week 2017 (Autodesk Fusion 360)
The objective of this workshop was to understand the concept of Product Design Engineering, to create a model of new Products, to enrich the knowledge about Autodesk Fusion 360 and experience Hands on Training

10th-11th November 2017

Two Days Workshop on Design of Experiments (DoE)
Design of experiments (DOE) is a structured methodology to optimize product and process designs, to accelerate the development cycle, to reduce development costs and to effectively trouble shoot manufacturing problems.The resource person for the program was Mr.K.V.Ramanan, General Manger, Group Head – Quality & Training, Western Thompson Ltd, Chennai.