For the academic year of 2021-2022, total 50 SCI/WOS indexed papers are published.
1. Sanjeevi, Vigneshwaran Shanmugam, Suresh Kumar, Velmurugan Ganesan, Gabriel Sas, Deepak Joel Johnson, Manojkumar Shanmugam et al. "Effects of water absorption on the mechanical properties of hybrid natural fibre/phenol formaldehyde composites." Scientific Reports, 11, no. 1 (2021): 1-11. Impact factor: 5.133. 2. Ammar H. Elsheikh, Mohamed Abd Elaziz, B. Ramesh, Mohamed Egiza, Mohammed A.A. Al-qaness, Modeling of drilling process of GFRP composite using a hybrid random vector functional link network/parasitism-predation algorithm, Journal of Materials Research and Technology, 14 (September-October) (2021) 298-311. Impact Factor: 5.039. 3. Sathish, T., N. Sabarirajan, and R. Saravanan. "Nano-alumina reinforcement on AA 8079 acquired from waste aluminium food containers for altering microhardness and wear resistance." Journal of Materials Research and Technology 14 (2021): 1494-1503. Impact Factor: 5.039. 4. Ammar H. Elsheikh, T. Muthuramalingam, S. Shanmugan, Ahmed Mohamed Mahmoud Ibrahim, B. Ramesh, Ahmed B. Khoshaim, Essam B. Moustafa, Badr Bedairi, Hitesh Punchal, Ravishankar Sathyamurthy, Fine-tuned artificial intelligence model using pigeon optimizer for prediction of residual stresses during turning of Inconel 718, Journal of Materials Research and Technology, ISSN: 2238-7854. Impact Factor: 5.039. 5. Sathish, T., V. Mohanavel, Asif Afzal, M. Arunkumar, M. Ravichandran, Sher Afghan Khan, Parvathy Rajendran, and Mohammad Asif. "Advancement of steam generation process in water tube boiler using Taguchi design of experiments." Case Studies in Thermal Engineering 27 (2021): 101247. Impact factor: 4.724. 6. Alagumalai, Vasudevan, Vigneshwaran Shanmugam, Navin Kumar Balasubramanian, Yoganandam Krishnamoorthy, Velmurugan Ganesan, Michael Försth, Gabriel Sas, Filippo Berto, Avishek Chanda, and Oisik Das. "Impact Response and Damage Tolerance of Hybrid Glass/Kevlar-Fibre Epoxy Structural Composites." Polymers 13, no. 16 (2021): 2591. Impact factor: 4.329. 7. Razavi, Seyed Mohammad Javad, Rasoul Esmaeely Neisiany, Moe Razavi, Afsaneh Fakhar, Vigneshwaran Shanmugam, Vasudevan Alagumalai, Michael Försth, Gabriel Sas, and Oisik Das. "Efficient Improvement in Fracture Toughness of Laminated Composite by Interleaving Functionalized Nanofibers." Polymers 13, no. 15 (2021): 2509. Impact factor: 4.329. 8. Velmurugan, Vigneshwaran Shanmugam, Babu Kaliyamoorthy, Sekar Sanjeevi, Suresh Kumar Shanmugam, Vasudevan Alagumalai, Yoganandam Krishnamoorthy et al. "Optimisation of Mechanical Properties in Saw-Dust/Woven-Jute Fibre/Polyester Structural Composites under Liquid Nitrogen Environment Using Response Surface Methodology." Polymers 13, no. 15 (2021): 2471. Impact factor: 4.329. 9. S., C., Natrayan, L., Lydia, E. L., Rahaman, A., Escorcia-Gutierrez, J. et al. (2022). Deep Learning with Backtracking Search Optimization Based Skin Lesion Diagnosis Model. CMC-Computers, Materials & Continua, 70(1), 1297–1313. Impact Factor: 3.772. 10. Akhtar, Mohammad Nishat, T. Sathish, V. Mohanavel, Asif Afzal, K. Arul, M. Ravichandran, Inzarulfaisham Abd Rahim, S. S. N. Alhady, Elmi Abu Bakar, and B. Saleh. "Optimization of Process Parameters in CNC Turning of Aluminum 7075 Alloy Using L27 Array-Based Taguchi Method." Materials 14, no. 16 (2021): 4470. Impact factor: 3.623. 11. Vigneshwaran Shanmugam, Uthayakumar Marimuthu, Sundarakannan Rajendran, Arumugaprabu Veerasimman, Adamkhan Mahaboob Basha, Mohd Shukry Bin Abdul Majid, Rasoul Esmaeely Neisiany et al. "Experimental Investigation of Thrust Force, Delamination and Surface Roughness in Drilling Hybrid Structural Composites." Materials 14, no. 16 (2021): 4468. Impact factor: 3.623. 12. Chairman, Chelliah Anand, Manickam Ravichandran, Vinayagam Mohanavel, Thanikodi Sathish, Ahmad Rashedi, Ibrahim M. Alarifi, Irfan Anjum Badruddin, Ali E. Anqi, and Asif Afzal. "Mechanical and Abrasive Wear Performance of Titanium Di-Oxide Filled Woven Glass Fibre Reinforced Polymer Composites by Using Taguchi and EDAS Approach." Materials 14, no. 18 (2021): 5257. Impact factor: 3.623. 13. Sathish Thanikodi, Abdul Razak R. Kaladgi, V. Mohanavel, K. Arul, Asif Afzal, Abdul Aabid, Muneer Baig, and Bahaa Saleh. "Experimental Investigation of the Friction Stir Weldability of AA8006 with Zirconia Particle Reinforcement and Optimized Process Parameters." Materials 14, no. 11 (2021): 2782. Impact factor: 3.623. 14. Sathish, T., V. Mohanavel, T. Arunkumar, T. Raja, Ahmad Rashedi, Ibrahim M. Alarifi, Irfan Anjum Badruddin, Ali Algahtani, and Asif Afzal. "Investigation of Mechanical Properties and Salt Spray Corrosion Test Parameters Optimization for AA8079 with Reinforcement of TiN+ ZrO2." Materials 14, no. 18 (2021): 5260. Impact factor: 3.623. 15. Tamilselvi, S., Gunasundari, S., Karuppiah, N., Razak RK, A., Madhusudan, S., Nagarajan, V.M., Sathish, T., Shamim, M.Z.M., Saleel, C.A. and Afzal, A., 2021. A Review on Battery Modelling Techniques. Sustainability, 13(18), p.10042. Impact factor: 3.251. 16. Rhoda Afriyie, Vigneshwaran Shanmugam, Sreenivasan Narayanan, Seyed Mohammad Javad Razavi, Adrian Ulfberg, Thomas Blanksvärd, Faez Sayahi et al. "Biochar-Added Cementitious Materials—A Review on Mechanical, Thermal, and Environmental Properties." Sustainability 13, no. 16 (2021): 9336. Impact factor: 3.251. 17. Vigneshwaran Shanmugam, Munagoti Venkata Pavan, Karthik Babu, and Balamurugan Karnan. "Fused deposition modeling based polymeric materials and their performance: A review." Polymer Composites. Impact factor: 3.171. 18. Arunkumar, Munimathan, Vinayagam Mohanavel, Asif Afzal, Thanikodi Sathish, Manickam Ravichandran, Sher Afghan Khan, Nur Azam Abdullah, Muhammad Hanafi Bin Azami, and Mohammad Asif. "A Study on Performance and Emission Characteristics of Diesel Engine Using Ricinus Communis (Castor Oil) Ethyl Esters." Energies 14, no. 14 (2021): 4320. Impact factor: 3.004. 19. Dhinakaran Veeman, M. Varsha Shree, P. Sureshkumar, T. Jagadeesha, L. Natrayan, M. Ravichandran, Prabhu Paramasivam, "Sustainable Development of Carbon Nanocomposites: Synthesis and Classification for Environmental Remediation", Journal of Nanomaterials, vol. 2021, Article ID 5840645, 21 pages, 2021. Impact Factor: 2.986. 20. V. Swamy Nadh, Chunchubalarama Krishna, L. Natrayan, KoppulaMidhun Kumar, K. J. N. Sai Nitesh, G. Bharathi Raja, Prabhu Paramasivam, "Structural Behavior of Nanocoated Oil Palm Shell as Coarse Aggregate in Lightweight Concrete", Journal of Nanomaterials, vol. 2021, Article ID 4741296, 7 pages, 2021. Impact Factor: 2.986. 21. T. N. Suresh Kumar, T. Deepa, L. Natrayan, Marabathina Maheedhar, Raja Kathiravan, "Evaluation of Prestrain Annealing Impact on Nanomaterial Sensitization", Journal of Nanomaterials, vol. 2021, Article ID 3175569, 13 pages, 2021. Impact Factor: 2.986. 22. V. Sivaprakash, L. Natrayan, R. Suryanarayanan, R. Narayanan, Prabhu Paramasivam, "Electrochemical Anodic Synthesis and Analysis of TiO2 Nanotubes for Biomedical Applications", Journal of Nanomaterials, vol. 2021, Article ID 9236530, 10 pages, 2021. Impact Factor: 2.986. 23. L. Natrayan, M. Ravichandran, Dhinakaran Veeman, P. Sureshkumar, T. Jagadeesha, R. Suryanarayanan, Wubishet Degife Mammo, "Enhancement of Mechanical Properties on Novel Friction Stir Welded Al-Mg-Zn Alloy Joints Reinforced with Nano-SiC Particles", Journal of Nanomaterials, vol. 2021, Article ID 2555525, 10 pages, 2021. Impact Factor: 2.986. 24. Paranthaman, V., Shanmuga Sundaram, K. & L. Natrayan. Effect of Silica Content on Mechanical and Microstructure Behaviour of Resistance Spot Welded Advanced Automotive TRIP Steels. Silicon (2021). Impact factor: 2.670. 25. Ali, K.S.A., Mohanavel, V., Ravichandran, M. Thanikodi Sathish et al. Microstructure and Mechanical Properties of Friction Stir Welded SiC/TiB2 Reinforced Aluminum Hybrid Composites. Silicon (2021). Impact factor: 2.670. 26. Dhinakaran Veeman, M. Swapna Sai, P. Sureshkumar, T. Jagadeesha, L. Natrayan, M. Ravichandran, Wubishet Degife Mammo, "Additive Manufacturing of Biopolymers for Tissue Engineering and Regenerative Medicine: An Overview, Potential Applications, Advancements, and Trends", International Journal of Polymer Science, vol. 2021, Article ID 4907027, 20 pages, 2021. Impact Factor: 2.64. 27. T. Sathish, V. Mohanavel, Alagar Karthick, M. Arunkumar, M. Ravichandran, S. Rajkumar, "Study on Compaction and Machinability of Silicon Nitride (Si3N4) Reinforced Copper Alloy Composite through P/M Route", International Journal of Polymer Science, vol. 2021, Article ID 7491679, 10 pages, 2021. Impact factor: 2.64. 28. T. Sathish, Kumaran Palani, L. Natrayan, Anjibabu Merneedi, Melvin Victor De Poures, Dinesh Kumar Singaravelu, "Synthesis and Characterization of Polypropylene/Ramie Fiber with Hemp Fiber and Coir Fiber Natural Biopolymer Composite for Biomedical Application", International Journal of Polymer Science, vol. 2021, Article ID 2462873, 8 pages, 2021. Impact factor: 2.64. 29. T. Sathish, Chandramohan, D., Dinesh Kumar, S. et al. A facile synthesis of Ag/ZnO nanocomposites prepared via novel green mediated route for catalytic activity. Appl. Phys. A 127, 692 (2021). Impact factor: 2.584. 30. S. Vigneshwaran, Karthik Babu, Thomas F. Garrison, Antonio J. Capezza, Richard T Olsson, Seeram Ramakrishna, Mikael S. Hedenqvist, Shuvra Singha, Mattia Bartoli, Mauro Giorcelli, Oisik Das, Filippo Berto. Potential natural polymer-based nanofibres for the development of facemasks in countering viral outbreaks. Journal of Applied Polymer Science. (Accepted) 2021. Impact factor: 2.52. 31. Arunkumar Munimathan, T. Sathish, V. Mohanavel, Alagar Karthick, R. Madavan, Ram Subbiah, Chandran Masi, S. Rajkumar, "Investigation on Heat Transfer Enhancement in Microchannel Using Al2O3/Water Nanofluids", International Journal of Photoenergy, vol. 2021, Article ID 6680627, 9 pages, 2021. Impact factor: 2.113. 32. Angalaeswari Sendrayaperumal, Somyak Mahapatra, Sabuja Sanket Parida, Komal Surana, Parandhaman Balamurugan, L. Natrayan, Prabhu Paramasivam, "Energy Auditing for Efficient Planning and Implementation in Commercial and Residential Buildings", Advances in Civil Engineering, vol. 2021, Article ID 1908568, 10 pages, 2021. Impact Factor: 1.942. 33. Naga Dheeraj Kumar Reddy Chukka, L. Natrayan, Wubishet Degife Mammo, "Seismic Fragility and Life Cycle Cost Analysis of Reinforced Concrete Structures with a Hybrid Damper", Advances in Civil Engineering, vol. 2021, Article ID 4195161, 17 pages, 2021. Impact Factor: 1.942. 34. P. Gurusamy, T. Sathish, V. Mohanavel, Alagar Karthick, M. Ravichandran, Omaima Nasif, Saleh Alfarraj, Velu Manikandan, S. Prasath, "Finite Element Analysis of Temperature Distribution and Stress Behavior of Squeeze Pressure Composites", Advances in Materials Science and Engineering, vol. 2021, Article ID 8665674, 9 pages, 2021. Impact factor: 1.726. 35. R. Suryanarayanan, V. G. Sridhar, L. Natrayan, S. Kaliappan, Anjibabu Merneedi, T. Sathish, Alazar Yeshitla, "Improvement on Mechanical Properties of Submerged Friction Stir Joining of Dissimilar Tailor Welded Aluminum Blanks", Advances in Materials Science and Engineering, vol. 2021, Article ID 3355692, 6 pages, 2021. Impact Factor: 1.726. 36. Maganti Sandeep Kauthsa Sharma, S. Umadevi, V. Swamy Nadh, L. Natrayan, "Mechanical Behavior of Silica Fume Concrete Filled with Steel Tubular Composite Column", Advances in Materials Science and Engineering, vol. 2021, Article ID 3632991, 9 pages, 2021. Impact Factor: 1.726. 37. S. Dinesh Kumar, L. Ponraj Sankar, T. Sathish, V. Vijayan, A. Parthiban, R. Kamalakannan, S. Rajkumar, "Improving the Mechanical Properties of Natural Fiber Composites of Hemp Fiber with Ramie and Banana Fiber through Compression Molding Method", Advances in Materials Science and Engineering, vol. 2021, Article ID 7813634, 8 pages, 2021. Impact factor: 1.726. 38. Y. Sesharao, T. Sathish, Kumaran Palani, Anjibabu Merneedi, Natrayan L, Melvin Victor De Poures, T. Maridurai, "Optimization on Operation Parameters in Reinforced Metal Matrix of AA6066 Composite with HSS and Cu", Advances in Materials Science and Engineering, vol. 2021, Article ID 1609769, 12 pages, 2021. Impact factor: 1.726. 39. G. Jegan, P. Kavipriya, T. Sathish, S. Dinesh Kumar, T. Samraj Lawrence, T. Vino, "Synthesis, Mechanical, and Tribological Performance Analysis of Stir-Casted AA7079: ZrO2 + Si3N4 Hybrid Composites by Taguchi Route", Advances in Materials Science and Engineering, vol. 2021, Article ID 7722370, 15 pages, 2021. Impact factor: 1.726. 40. L. Ponraj Sankar, G. Aruna, T. Sathish, A. Parthiban, V. Vijayan, S. Dinesh Kumar, S. Rajkumar, Addisalem Mekonnen, Mebratu Tufa, "Strength Enhancement Study on Composites of AA6066 Aluminium Alloy with Magnesium Oxide and Coal Ash", Advances in Materials Science and Engineering, vol. 2021, Article ID 2810106, 8 pages, 2021. Impact factor: 1.726. 41. T. Sathish, S. Tharmalingam, V. Mohanavel, K. S. Ashraff Ali, Alagar Karthick, M. Ravichandran, Sivanraju Rajkumar, "Weldability Investigation and Optimization of Process Variables for TIG-Welded Aluminium Alloy (AA 8006)", Advances in Materials Science and Engineering, vol. 2021, Article ID 2816338, 17 pages, 2021. Impact Factor: 1.726. 42. S. Jayaprakash, S. Siva Chandran, T. Sathish, Bhiksha Gugulothu, R. Ramesh, M. Sudhakar, Ram Subbiah, "Effect of Tool Profile Influence in Dissimilar Friction Stir Welding of Aluminium Alloys (AA5083 and AA7068)", Advances in Materials Science and Engineering, vol. 2021, Article ID 7387296, 7 pages, 2021. Impact Factor: 1.726. 43. Anjibabu Merneedi, Nalluri Mohan Rao, L. Natrayan, L. Yuvaraj, Prabhu Paramasivam, "Free Vibration Analysis of Thick Rectangular and Elliptical Plates with Concentric Cut-Out", Advances in Materials Science and Engineering, vol. 2021, Article ID 7212075, 14 pages, 2021. Impact Factor: 1.726. 44. Yoganandam, K., Vigneshwaran Shanmugam, A. Vasudevan, D. Vinodh, N. Nagaprasad, Balasubramaniam Stalin, Alagar Karthick, Chandrabhanu Malla, and Murugesan Bharani. "Investigation of dynamic, mechanical, and thermal properties of Calotropis procera particle-reinforced PLA biocomposites." Advances in Materials Science and Engineering 2021 (2021). Impact factor: 1.726. 45. Muruganantham Ponnusamy, Bhanu Pratap Pulla, T. Sathish, Sivakumar Karthikeyan, S. Ravindran, Balachandra Pattanaik, Ram Subbiah, "Mechanical Strength and Fatigue Fracture Analysis on Al-Zn-Mg Alloy with the Influence of Creep Aging Process", Advances in Materials Science and Engineering, vol. 2021, Article ID 1899128, 5 pages, 2021. Impact factor: 1.726. 46. V. Vijayan, A. Parthiban, T. Sathish, L. Ponraj Sankar, S. Dinesh Kumar, S. Saravanakumar, Dawit Tafesse, "Optimization of Reinforced Aluminium Scraps from the Automobile Bumpers with Nickel and Magnesium Oxide in Stir Casting", Advances in Materials Science and Engineering, vol. 2021, Article ID 3735438, 10 pages, 2021. Impact factor: 1.726. 47. M. Kavitha, V. M. Manickavasagam, T. Sathish, Bhiksha Gugulothu, A. Sathish Kumar, Sivakumar Karthikeyan, Ram Subbiah, "Parameters Optimization of Dissimilar Friction Stir Welding for AA7079 and AA8050 through RSM", Advances in Materials Science and Engineering, vol. 2021, Article ID 9723699, 8 pages, 2021. Impact Factor: 1.726. 48. Karthik Babu, Rhoda Afriye Mensah, S. Vigneshwaran, Michael Försth, Gabriel Sas, Oisik Das4, Ágoston Restás, Filippo Berto. Fire behaviour of 3D printed polymeric composites: A review. Journal of Materials Engineering and Performance. (Accepted) 2021. Impact Factor: 1.652. 49. Bovas Herbert Alphonse, Ramji Basavaraj Rayappa, Hasan Koten, Ramesh B, Deepak Umrao Sarwe, Comparative design and CFD analysis of 3D printed ABS nozzle aerator for discharge reduction, Thermal Science, 00 (2021): 155-155. Impact Factor: 1.625. 50. Anantha, Sobhanadri, Senthilkumar Gnanamani, Vivekanandan Mahendran, Venkatesh Rathinavelu, Ramkumar Rajagopal, Dawit Tafesse, and Parthipan Nadarajan. "A CFD investigation and heat transfer augmentation of double pipe heat exchanger by employing helical baffles on shell and tube side." Thermal Science 00 (2021): 300-300. Impact Factor: 1.625.