Back to Publications

For the academic year of 2015-2018, total 187 Scopus indexed journals are published.  
​1. Anoop, Mrs.Rajalakshmi,K.Sriharish, K..Girishwaran, “POWER GENERATION FROM THE SILENCERS OF AUTOMOBILES(BIKES) AND ICE MELTING TECHNOLOGY FOR ROADS USING THERMO-ELEECTRIC GENERATOR”, International Journal of Engineering Research and Allied Sciences (IJERAS), 10, NO 33,26447, 2015
2. Anoop, RAGUNANDHAN,SANJEETH KUMAR,T.R RAJAGOPAL,U LOKESH,SIBI GEORGE, “ALTERTED SHAFT DRIVEN BICYCLE”, International Journal of Engineering Research and Allied Sciences (IJERAS), 10, 4,3736, 2015
3. Anoop, B.Anil Kumar Reddy, T.Lakshmi Lokesh, “INVESTIGATION ON VIBRATION ANALYSIS OF 4-STROKE 2-CYLINDER IC ENGINE USING BLENDS”, International Journal of Pure and Applied Mathematics, 119, No. 12 2018, 15829-15839,15841, 2018
4. Anoop, Y.Tarun Kumar, A.Tirumala Rao, “INVESTIGATION STUDY OF BIOGAS PRODUCTION USING CATALYST”, International Journal of Pure and Applied Mathematics, 119, No. 12 2018, 15829-15839,1, 2018
5. Anoop, S.Sunil, Besta Manikanta Raju, Shaik Nazma Sharon, “Marine Propulsion Engines and Design of Propeller Shaft”, International Journal of Engineering Research and Allied Sciences (IJERAS), 2, 8,1, 2017
6. Anoop, J.DANIEL RAJ, S.KARTHIKEYAN,BARANITHAMBACHA,A.VELMURUGAN, “CHARACTERISTICS OF LASER BEAM WELDED AISI 301 & 409”, International Journal of Engineering Research and Allied Sciences (IJERAS), 10, 4,3732, 2015
7. Anoop, S.V.S Jitesh, Sathi Praveen Kumar Reddy, M. Vinod Kumar Reddy,, “Comparitive Analysis of Corrosion Controlling Techniques on Hull of the Ship”, International Journal of Engineering Research and Allied Sciences (IJERAS), 2, 8,23, 2017
8. Anoop, V. Sai Venkat Mahesh, I.M.Prabhu Raj,, “Navigation System for Autonomous Underwater Vehicle”, International Journal of Engineering Research and Allied Sciences (IJERAS), 2, 9,4, 2017
9. Anoop, Hemnath D, Kaleeswaran M, Karthick S, Syed Abuthahir K, “NOISE DEDUCTION AND CONTROL IN COUNTERSHAFT”, International Journal of Engineering Research and Allied Sciences (IJERAS), 10, NO 65,230, 2015
10. Anoop, Deepak Kumar, Abhishek Warrier, C.Gugan, K.Dinesh, Benjamin Franklin, “Automatic Railway Gate Control Using Vibrating Sensor”, International Journal of Engineering Research and Allied Sciences (IJERAS), 10, NO 65,66, 2015
11. Anoop, S.Nakkeeran,S.Dhinakaran and Dr. D.Vijayaganapathy, “EMISSION TEST ON HONDA GENERATOR ENGINE USING ETHANOL AS ALTERNATE FUEL”, International Journal of Pure and Applied Mathematics, 118, No. 24 2018,1, 2018
12. Anoop, S.Dhinakaran, S.Nakkeeran and Dr. D.Vijayaganapathy, “EMISSION TEST ON YAMAHA FAZER ENGINE USING ETHANOL AS ALTERNATE FUEL”, International Journal of Pure and Applied Mathematics, 118, No. 24 2018,1, 2018
13. Dhivakar Raviram, Anand Kumar, “Impact of nano-silicon fuel addictive on combustion, performance and emission of a twin cylinder CI engine”, MATEC WEB of conferences, 1, 172,1, 2018
14. Jayakumar, Saran. V., Bharathiraja. G., Jaseem. K. S., and Ragul. G., “Analysis of Natural Frequency for an Aircraft Wing Structure Under Pre-Stress Condition”, International Journal of Mechanical Engineering and Technology, 8, 8,1118, 2016
15. Jayakumar V, Pankaj Giri, Charan Kumar. V and Muniappan. A.,, “Investigation of Mechanical Properties of Natural Fiber Composite With & Without Fiber Surface Treatments”, International Journal of Mechanical and Production Engineering Research and Development, 8, 4,785, 2018
16. Jayakumar V, Hemanta Singha., Ragul. G., “Investigation on Effects of Alternative Process Routing in the Design of Cellular Manufacturing System”, Indian Journal of Science and Technology, 9, 36,1, 2016
17. Jayakumar V, Santhosh Kumar. D., Shajin Majeed, “Modal Analysis and Design Optimization of Automotive Wheel”, Journal of Chemical and Pharmaceutical Sciences, 10, 1,667, 2017
18. Jayakumar V, Bino Shaji, Karthik. V., Sivasubramanian. A.,, “Structural Analysis on Al 7075 T-651 Shaft”, Journal of Chemical and Pharmaceutical Sciences, 10, 1,646, 2017
19. Jayakumar V, Ragul. G, Sha. S.U, Biswas. R and Kumar. C.,, “Tensile Strength Improvement using Human Hair Reinforcement in Recycled High Density Polyethylene”, Journal of Scientific and Industrial Research, 77, 7,410, 2018
20. Jayakumar V, S. Harihara Kumaran, F. Mohammed Ajmal Sheriff, A. Pandiyan, Shajin Majeed, “TOPOLOGY OPTIMIZATION OF AIRCRAFT HATCH LOCK”, International Journal of Mechanical Engineering and Technology, 8, 9,86, 2017
21. Jayakumar V, Jayakumar. V., Ajitesh Patnaik., Shanmuganandam, K., Thiagarajan. C., Ranganathan. S.,, “An Analytic Hierarchy Process Framework For Evaluation and Selection of a University in Abroad for Higher Education”, International Journal of Pure and Applied Mathematics, 116, 23,169, 2017
22. Jayakumar V, Mohammed Ajmal Sheriff, Muniappan. A., Bharathiraja. G., and Ragul. G., “Implementation of Seven Tools of Quality in Educational Arena: A Case Study”, International Journal of Mechanical Engineering and Technology, 8, 8,882, 2017
23. Jayakumar V, Jayakumar. V., Madhu. S., Muniappan. A., Ansari. AH., and Sattu Naveen Kumar,, “Investigation of Thermal Characteristics in Solid Rocket Nozzle with Insulate using CAD/CAE”, International Journal of Pure and Applied Mathematics, 119, 7,443, 2018
24. Jayakumar V, Jayakumar. V., Arunagiri. P., Muniappan. A., and Shanmuganandam, “Reduction of Worker Fatigue Level in the Manufacturing Industries using Effort and Ergonomy Index”, International Journal of Pure and Applied Mathematics, 119, 7,431, 2018
25. Jayakumar V, Manimaran. A., Muthuraman, “A Novel Tolerance Evaluation Framework for Green Supply Chain Management Implementation”, International Journal of Mechanical Engineering and Technology, 9, 1,152, 2018
26. Jayakumar V, Chintala Sai Virinchy, Abdul Hafeez Asif, Jayakumar. V., Santhosh Kumar. D., and Marrireddy Raviteja Reddy, “A Review on Selection, Manufacturing and Testing of Composite Materials for Alloy Wheels”, International Journal of Pure and Applied Mathematics, 118, 9,331, 2018
27. Jayakumar V, Ragul. G., Kalivarathan. G., Praveen C.P., and Naveen Kumar. S., “An Analytical Investigation on Design and Structural Analysis of Cam Shaft using Solidworks and Ansys in Automobiles”, Indian Journal of Science and Technology, 9, 36,1, 2016
28. Jayakumar V, Ragul. G., Naveen Kumar. S., Kalivarathan. G., Praveen C.P., and Into Jacob, “An Investigation in Analysis of Dry Turning in MQL Method for Predicting Tool Wear and to Improve Surface Roughness”, Indian Journal of Science and Technology, 9, 36,1, 2016
29. Jayakumar V, Pradeep. P., Edwin Raja Dhas J John, Suthan. R., “Characterization of Palm Fibers for Reinforcement in Polymer Matrix”, ARPN Journal of Engineering and Applied Sciences, 11, 12,7927, 2016
30. Jayakumar V, Sathish. S., Deeban Chakravarthy, Ashok. R., Vishal. ES., “Configuration and Analysis of Bicycle Frames using ANSYS Software”, Journal of Chemical and Pharmaceutical Sciences, 10, 1,699, 2017
31. Jayakumar V, Ragul. G., Arun Thampi, Tedy Thomas, Praveen C.P., Into Jacob, “Design and Computational Investigation of Double Piston U-Shaped Single Connecting Rod in Remodelled Internal Combustion Engines”, Indian Journal of Science and Technology, 9, 36,1, 2016
32. Jayakumar V, Ragul. G., Reddy. C.V., Abhijit Roy, Abhishek Samanta, “Design, Analysis and Impact Behavior of Magnesium Alloys (Zk60A) of Low Pressure Die Casting for Automotive Wheels by Finite Element Method”, ARPN Journal of Engineering and Applied Sciences, 12, 22,6488, 2017
33. Jayakumar V, Chandan Kumar, Ragul. G, and Prasidh E Prakash, “Design, Structural Analysis and Performance Investigation on Static Seismic Analysis of G+10 Multi Storeystructures with and without Floating Column - A Comparative Study”, International Journal of Pure and Applied Mathematics, 119, 16,805, 2018
34. Jayakumar V, Dehesinghraja. J, Prasidh E Prakash, Samrat Majumdar and G. Ragul, “Effectiveness and Distribution Challenges in Channels for Ayurvedic Solutions: A Case Study”, International Journal of Pure and Applied Mathematics, 116, 16,833, 2018
35. Jayakumar V, Srikrishnan. S, Dash. P. K.,, “Evaluation of Critical Blockage Ratio and Pulse Length in a Pulse Detonation Engine using CFD and MATLAB”, MATEC Web of Conferences, 172, 2006,1, 2018
36. Jayakumar V, Variavel. M, Pugazhenthi. R, “Experimentation and Simulation Process of Friction Stir Welding for Lightweight Similar and Dissimilar Materials”, MATEC Web of Conferences, 172, 4002,1, 2018
37. Jayakumar V, Manimaran. A., Muthuraman. V and Jayakumar. V, “Implementation of Tolerance Evaluation Framework for Green Supply Chain Management in a Gear Manufacturing Industry: A Case Study”, International Journal of Pure and Applied Mathematics, 118, 9,345, 2018
38. Jayakumar V, Sivakumar. N., Geetha. N. K., Venkatamuthukumar. J., “Mechanical Studies on Pure and Fe3+ Doped Potassium Hydrogen Phthalate Single Crystals for Device Fabrications”, Indian Journal of Science and Technology, 9, 36,1, 2016
39. Jayakumar V, G. Ragul, Rituparna Biswas, C. Sreejith, G. Shaikh Usman Sha, “MODELLING, STRUCTURAL ANALYSIS AND CFD FLUENT ANALYSIS OF HIGH SPEED GAS TURBINE BLADES”, International Journal of Mechanical Engineering and Technology, 8, 9,77, 2017
40. Jayakumar V, Ragul. G, Prasidh E Prakash, Sankar. S, Samrat Majumdar, “Parameter and Multiple Performance Optimization of MEDM through Various Electrode for Heat Treated Tool Steel”, International Journal of Pure and Applied Mathematics, 119, 16,769, 2018
41. Jayakumar V, G. Ragul1 , Abishek Samanta, S. Sankar, Abhijit Roy, C. Sreejith, “PERFORMANCE INVESTIGATION, SIMULATION AND TESTING OF VERTICAL AXIS WIND TURBINE WITH OMNI-DIRECTIONAL DUCT FOR TALL BUILDING IN URBAN LOCATION”, ARPN Journal of Engineering and Applied Sciences, 12, 19,5349, 2017
42. Jayakumar V, 13. Sankar. S, Manivarma Kumaresan, Ragul. G, and Christeena Mathew, “Performance of a Compression Ignition Engine with Blends of Biodiesel (from a mixture of Spirulina Microalgae Oil and Sunflower Oil) and Diesel”, International Journal of Pure and Applied Mathematics, 119, 16,787, 2018
43. Jayakumar V, Pankaj Giri, Charan Kumar. V., and Bharathiraja. G.,, “Some Studies on Mechanical Properties of Natural Fibre Polymer Composites with Fibre Surface Treatments”, International Journal of Mechanical Engineering and Technology, 8, 12,1113, 2017
44. Jayakumar V, Santhosh Kumar. D., Ravi Teja Reddy, Jayakumar. V., Sai Virinchy. C., and Abdul Hafeez Asif, “Studies on Design and Material Aspects of IC Engine Mounts for Vibration Reduction”, International Journal of Pure and Applied Mathematics, 118, 9,355, 2018
45. Suresh Kumar S, E.Sai Krishna, “DESIGN AND ANALYSIS OF CRANE HOOK WITH DIFFERENT MATERIALS”, International Journal of Mechanical Engineering and Technology (IJMET), , Issue 4,786, 2018
46. Suresh Kumar S, B. Ravisankar , Vishnu Chandar. S , R.P. Dhivakar Raviram, “Evaluation of mechanical properties of friction stir welded commercially pure aluminium”, MATEC Web of Conferences 172, 04003 (2018), 172, 172, 04003 (2018),1, 2018
47. Bharathi Raja, Aakash. A.S, Manoj. S, “ANALYSIS ON E-TRONIC TURBOCHARGER TO ELIMINATE TURBO LAG”, International Journal of Mechanical Engineering and Technology (IJMET), 9, 6,618, 2018
48. Bharathi Raja, P. Arunagiri, V. Jayakumar and A. Muniappan, “REDESIGN OF PRODUCTION FLOW PROCESSFOR UNIT PUMP COMMON RAIL USING LEAN SYSTEMS”, International Journal of Pure and Applied Mathematics, 119, 7,381, 2018
49. Bharathi Raja, M.Kullayappa, C.Sai Bharathreddy, and V.Jayakumar, “INVESTIGATION ON FRACTURE TOUGHNESS OF TREATED HYBRID PARTICULATE REINFORCED POLYESTER COMPOSITE”, International Journal of Pure and Applied Mathematics, 119, 12,15677, 2018
50. Bharathi Raja, A. Gnanavelbabu, P. Arunagiri,V. Jayakumar , V. Velmurugan, “REDUCTION OF OPERATOR’S LOADING AND UNLOADING TIME USING LEAN SYSTEMS FOR PRODUCTIVITY IMPROVEMENT”, International Journal of Mechanical Engineering and Technology (IJMET), , Issue 10,207, 2017
51. Bharathi Raja, Balagiddappagari Bharathkumar, K Sasikumar, and V. Jayakumar, “STUDY OF MECHANICAL PROPERTIES OF ALGAE FILLER VINYL ESTER COMPOSITE”, International Journal of Pure and Applied Mathematics, 119, 12,15667, 2018
52. Devika, Umanath, “A Review on Abrasive Water Jet Milling of High Strength Materials”, International journal of Mechanical and Production Engineering Research and Development, 8, 8,57, 2018
53. Devika, Umanath, “Optimization of electric discharge machining parameters on titanium alloy (ti-6al-4v) using Taguchi parametric design and genetic algorithm”, MATEC Web of Conferences, , 172,1, 2018
54. Prakash M, S. Rinesh, G.Bharathiraja and Ben mathew, “Numerical and Heat Transfer Investigation in Heat Exchanger Packed with CuO Embryonic Fluids”, International Journal of Pure and Applied Mathematics, 119, 15,905, 2018
55. Ranganathan S, N. Nafeed, P Loganathan, S.Ranganathan and C.Thiagarajan,, “EVALUATION OF MECHANICAL PROPERTIES OF MG ALLOY/SIC/GRAPHITE HYBRID METAL MATRIX COMPOSITES USING DESIRABILITY APPROACH”, International Journal of Pure and Applied Mathematics, 119, Special Issue, No 12,15619, 2018
56. Ranganathan S, 26. V. Krishna Kumar, K.J. Gokuleshwar, and C.Thiagarajan, “FABRICATION AND MECHANICAL PROPERTY STUDY ON GLASS/SISAL/BANANA NATURAL FIBRES”, International Journal of Pure and Applied Mathematics, 119, Special Issue, No 12,15637, 2018
57. Ranganathan S, I. Manivannan, S. Gopalakannan and S. Suresh, “Mechanical Properties and Tribological Behavior of Al6061–SiC–Gr Self-Lubricating Hybrid Nanocomposites”, Transaction of Indian Institute of Metals, , Issue 8,1897, 2018
58. Ranganathan S, 24. Abdul Mannan, B. Sai Kiran, and C.Thiagarajan, “SLIDING WEAR BEHAVIOR OF CAST AL/SIC/GR HYBRID METAL MATRIX COMPOSITES”, Transaction of Indian Institute of Metals, 119, Special Issue, No 12,15609, 2018
59. Ranganathan S, I. Manivannana,*, S. Ranganathanb, S. Gopalakannanc, S. Sureshd, K. Nagakarthigane, R. Jubendradassf, “Tribological and surface behavior of silicon carbide reinforced aluminum matrix nanocomposite”, Surfaces and Interfaces, 8, 2017,127, 2017
60. Senthiil., D Vijayaganapathy, S Bhakiyaraja, “APPLICATION OF LOW COST INHIBITORS TO REDUCE RATE OF CORROSION IN RAIL PASSENGER COACHES”, journal of advanced research in dynamical and control systems, 9, 17,0, 2017
61. Shanmuganandham, Dr.Jayakumar,Velmurugan, “HEAT TRANSFER ENHANCEMENT IN SHELL AND TUBE HEAT EXCHANGERS USING INSERTS”, International Journal of Mechanical Engineering and Technology (IJMET), 8, 10,184, 2017
62. Shanmuganandham, Dr.Jayakumar, “Performance evaluation of a 15 kWth biomass gasifier in downdraft and updraft operating modes: an experimental study”, MATEC Web of Conferences, 8, 8,1, 2018
63. Shanmuganandham, Dr.Jayakumar, “EXPERIMENTAL INVESTIGATION OF PERFORMANCE OF3 kW PYROLYSER”, International Journal of Pure and Applied Mathematics, 119, 7,737, 2018
64. Thiagarajan. C, S. Somasundaram, “Experimental Evaluation of a Chip Thickness Model Based on the Fracture Toughness of Abrasive and Work Material in Grinding of Alumina Ceramics”, International Journal of Modern Engineering Research, , Issue. 6,3825, 2013
65. Thiagarajan. C, B. Nagarajan, S. Govindarajan, “Risk Assessment of Tier-1 Automotive Supply Chain using Rating System”, International Journal of Research in IT, Management and Engineering,, , Aug-16,23, 2013
66. Thiagarajan. C, S. Ranganathan and P. Shankar, “Cylindrical grinding process parameters optimization of Al / SiC metal matrix composites”, International Journal of Scientific & Engineering Research,, , Issue 2,738, 2015
67. Thiagarajan. C, Dr.S.Somasundaram, Dr.P.Shankar, “Effect of Grinding Temperature during Cylindrical Grinding On Surface Finish of Al/Sic Metal Matrix Composites”, The International Journal Of Engineering And Science, , Issue. 12,58, 2013
68. Thiagarajan. C, G. Harish Kumar, A. Muralidharan, S.Ranganathan, “EVALUATION OF DESIGN AND MATERILAS FOR MIXER JAR TO OPTIMIZE IT’S VIBRATION LEVEL”, International Journal of Pure and Applied Mathematics, 119, 12,15765, 2018
69. Thiagarajan. C, S. Ranganathan, V.Jayakumar, A. Muniappan and Anoop Johny, “EVALUATION OF GRINDING PROCESS PARAMETERS OF AL/ SIC COMPOSITE USING DESIRABILITY APPROACH”, International Journal of Mechanical Engineering and Technology (IJMET), , Issue 10,190, 2017
70. Thiagarajan. C, T. Gowtham Reddy, C. Himananda Reddy, S.Ranganathan, “Numerical studies on automotive radiator tube with delta winglets on one end wall”, International Journal of Pure and Applied Mathematics, 119, 12,15743, 2018
71. Thiagarajan. C, S. Ranganathan and P. Shankar, “Performance Analysis of Cylindrical Grinding Process Parameters using Grey Relational Technique”, Applied Mechanics and Materials, , Issue 10.4028,388, 2015
72. Thiagarajan. C, A.Vishnu Dutt, K. Prudhvi Raj Reddy, S.Ranganathan, “PREPERATION OF Al-TiO2 COMPOSITE BY STIR CASTING METHOD AND ANALYSING IT’S TRIBOLOGICAL CHARACTERISTICS”, International Journal of Pure and Applied Mathematics, 119, 12,15665, 2018
73. Thiagarajan. C, B.Nagarajan, S.Somasundaram, “Risk Assessment of Tier-1 Automotive Supply Chain using Rating System”, International Journal of Technical Research and Applications, , Issue 5,133, 2015
74. Thiagarajan. C, KEERTHITHARAN.P,JAGADEESHWARAN.E,SHEIK ABDULLAH.J,VIGNESH.P,SANJEEV RAJ, “Design of Automatic Headlight Dimmer Prototype”, INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH, , Issue. 11,208, 2014
75. Thiagarajan. C, Syed Riyaz M, Udhayapriyan J, Rajesh Kumar R, Balamurugan S, Jeeva V, “VERTICAL AXIS WIND TURBINE”, International Journal of Applied Engineering Research,, , Issue. 65,6, 2015
76. Vijayaganapathy, P.Ashokkumar, S.Ariharan, Dr.C.Thiyagarajan, “EXPERMENTAL ANALYSIS OF AL6063 ALLOY METAL MATRIX WITH BORON CARBIDE AND GRAPHITE”, International Journal of Pure and Applied Mathematics, 120, 6,3881, 2018
77. Vijayaganapathy, S.Ariharan, P.Ashok Kumar, Dr.C.Thiagarajan, “MECHANICAL CHARACTERISATION OF AL6063 ALLOY METAL MATRIX WITH BORON CARBIDE AND GRAPHITE”, International Journal of Pure and Applied Mathematics, 120, 6,3861, 2018
78. Vijayaganapathy, M.Srinivas Rao, A. Girish Kumar, “DESIGN AND ANALYSIS OF AL 7075 CONNECTING ROD”, International Journal of Pure and Applied Mathematics, 118, 24,1, 2018
79. Vijayaganapathy, V. Hari Prasad, Upparpalli Guna, “DESIGN AND ANALYSIS OF SHOCK ABSORBER SPRING FOR AUTOMOBILES”, International Journal of Pure and Applied Mathematics, 120, 6,3955, 2018
80. Vijayaganapathy, Kanumuri Rajesh, Shaiksai Malik, “FINITE ELEMENT ANALYSIS OF HEAD GASKET”, International Journal of Pure and Applied Mathematics, 120, 6,3975, 2018
81. Vijayaganapathy, Shaiksai Malik, Kanumuri Rajesh, “HEAD GASKET FINITE ELEMENT MODEL CORRELATION”, International Journal of Pure and Applied Mathematics, 120, 6,3965, 2018
82. Vijayaganapathy, Upparpalli Guna, V. Hariprasad, “MODELLING AND STATIC ANALYSIS OF SHOCK ABSORBER SPRING OF A 150CC BIKE”, International Journal of Pure and Applied Mathematics, 120, 6,3945, 2018
83. Vijayaganapathy, C. Aravindh Kumar, R.V. Sairaj, “MODELLING AND STATIC ANALYSIS OF WINDMILL BLADES FOR VARIOUS APPLICATIONS”, International Journal of Pure and Applied Mathematics, 120, 6,4017, 2018
84. Vijayaganapathy, R.V. Saira, C. Aravindh Kumar, “PARAMETRIC DESIGN AND ANALYSIS OF WINDMILL BLADES FOR DOMESTIC APPLICATIONS”, International Journal of Pure and Applied Mathematics, 120, 6,4007, 2018
85. Vijayaganapathy, Konduru Sivaprasad Raju, S.Naveen kumar, S.Bhakiyaraja, “PARAMETRIC DESIGN AND FINITE ELEMENT ANALYSIS OF TURBINE BLADE”, International Journal of Pure and Applied Mathematics, 120, 6,3997, 2018
86. Vijayaganapathy, A.Girish Kumar, M.Srinivas Rao, “PARAMETRIC DESIGNING OF AISI 8620 STEEL CONNECTING ROD AND OPTIMUM ANALYSIS”, International Journal of Pure and Applied Mathematics, 118, 24,1, 2018
87. Vijayaganapathy, S.Naveen kumar, Konduru Sivaprasad Raju, S.Bhakiyaraja, “STATIC AND DESIGN ANALYSIS OF A STEAM TURBINE BLADE”, International Journal of Pure and Applied Mathematics, 120, 6,3989, 2018
88. Vijayaganapathy, J.L.Miren Kisshan , K.Sankara Narayanan, Ben Mathew Augustine, “DESIGN AND ANALYSIS OF WHEEL RIM”, International Journal of Pure and Applied Mathematics, 120, 6,3933, 2018
89. Mohammed Ajmal Sheriff, K. BALAJI, R. RANJITH, S. ARUN KUMAR, C. RAJA, “DESIGN AND ANALYSIS OF GRINDING WHEEL ANGLE DRESSING UNIT FOR BROACH TOOL”, International Research Journal of Engineering and Technology (IRJET), 4, 8,255, 2017
90. Mohammed Ajmal Sheriff, S.ARAVIND SAMY, A.R. MULLAI ARASU, R.MAGENDIRAN, M.SANTHOSH, “TWO DIMENSIONAL CRACK ANALYSIS OF AL7075-7651 UNDER VARIOUS TENSILE LOAD”, TWO DIMENSIONAL CRACK ANALYSIS OF AL7075-7651 UNDER VARIOUS TENSILE LOAD, 4, 8,1477, 2017
91. Mullai Sudaroli, Prof.Ajit Kumar Kolar, “An experimental study on the effect of membrane thickness and PTFE (polytetrafluoroethylene) loading on methanol crossover in direct methanol fuel cell”, Energy, 98, 1,204, 2016
92. Mullai Sudaroli, Prof.Ajit Kumar Kolar, “Control of Methanol Crossover Using Microporous Layer in Direct Methanol Fuel Cell”, IJTAE, 3, 3,410, 2013
93. Mullai Sudaroli, Prof.Ajit Kumar Kolar, “Experimental and Numerical Study of Serpentine Flow Fields for Improving Direct Methanol Fuel Cell Performance”, Fuel cells, 15, 6,826, 2015
94. Mullai Sudaroli, Prof.Ajit Kumar Kolar, “Heat and Mass Transfer Characteristics of Direct Methanol Fuel Cell: Experiments and Model”, Energy Procedia, 54, 56,359, 2014
95. Muniappan.A, R Solomon1, V Jayakumar1 , S Madhu2, G Md Shaqib1, “An estimating the effect of control process variables on kerf width in wire EDM of AZ91 magnesium alloy by Taguchi method”, IOP Conf. Series: Materials Science and Engineering, 402, 402,1, 2018
96. Muniappan.A, C. Thiagarajan and Aswin anand, “Automated maintenance system of solar panel for WILD ( Wheel impact load Detector)”, International journal of Scientific Research, , Issue 10,160, 2014
97. Muniappan.A, C.Thiagarajan2 , G.ArunKumar , X.Joseph Raj , J.Irene , N.Niranjan, “Conversion of Conventional Vehicle into Solar Powered Electric Vehicle – A Realistic Approach”, International Journal of Innovative Research in Science, Engineering and Technology, , Issue 9,16232, 2014
98. Muniappan.A, K.Aniiruth, S.Harish, Mohammed Saleem & S.Boobalan,, “Cutting speed Optimization for hybrid Aluminium composite in WEDM process by using Taguchi method”, International Journal of Applied Engineering Research, , No.65,30, 2015
99. Muniappan.A, C. Thiagarajan, “Design and fabrication of stab arm weldment for drill jig”, International Journal of Applied Research and Studies, , 7,1, 2014
100. Muniappan.A, C.Thiagarajan , Taukir Azam , X.Joseph Raj, “Design Modification & Analysis of HeaderTube Joint in Heat Exchanger”, International Journal of Innovative Research in Science, Engineering and Technology, , Issue 9,16265, 2014
101. Muniappan.A, C. Thiagarajan, P.V. Senthiil, V. Jayakumar and T. Shaafi, “EFFECT OF WIRE-EDM PROCESS PARAMETERS ON CUTTING SPEED OF AL6061 HYBRID COMPOSITE”, International Journal of Mechanical Engineering and Technology, , Issue 10,185, 2017
102. Muniappan.A, G.Saikrishna, T.Chandu, C.Lokeshkumar, G.Naveenkumar & G.Sharathkumar, “Experimental investigation of kerf width in WEDM process for hybrid Aluminium composite using Zinc coated Brass wire”, International Journal of Applied Engineering Research, , No.65,44, 2015
103. Muniappan.A, C. Thiagarajan and S. Somasundaram, “Experimental Investigation of Process Parameters on Machining of Hybrid Aluminium Composite using Zinc Coated Brass Wire”, International Journal of Applied Engineering Research, , No.65,269, 2015
104. Muniappan.A, G Md Shaqib ,V Jayakumar, G Bharathi Raja & R Soloman, “Experimental investigation of WEDM process parameters for cutting speed using response surface methodology”, IOP Conf. Series: Materials Science and Engineering, 402, 402,1, 2018
105. Muniappan.A, B.Vamsikrishna, RG.Charankumar, G.Ramakrishna, A.Rathish&B.Venkatsurya, “Fabrication of hybrid Aluminium composite using stir casting method”, International Journal of Applied Engineering Research, , No.65,38, 2015
106. Muniappan.A, B.Bhanu Prasad, A, Mohammadrafi, B.Ravikumar, A.Rahiman&B.Mallikarjunrao, “Fabrication of Solar Seed Dryer”, International Journal of Applied Engineering Research, , No.65,53, 2015
107. Muniappan.A, R Prasanna, T Shaafi, V Jayakumar and M Ajithkumar, “Investigation of wire EDM control variables on kerf width for Al6063/SiC/ Al2O3 composite by response surface methodology”, IOP Conf. Series: Materials Science and Engineering, 402, 402,1, 2018
108. Muniappan.A, R. Senthilkumar, V. Jayakumar, S. Venkata Ravikumar and P. Sai Tarunkumar, “Modeling and experimental investigation of process parameters in WEDM for surface roughness using regression model”, MATEC Web of Conferences, 172, 172,1, 2018
109. Muniappan.A, A P Jaivaakheish, V Jayakumar, A Arunagiri and R Senthilkumar, “Multi objective optimization of process parameters in WEDM of aluminum hybrid composite using taguchi and topsis techniques”, IOP Conf. Series: Materials Science and Engineering, 402, 402,1, 2018
110. Muniappan.A, C. Thiagarajan, “Optimization of kerf width in WEDM process for hybrid Aluminium composite by using Taguchi method”, International Journal of Applied Engineering Research, , No.33,25609, 2015
111. Muniappan.A, C. Thiagarajan and S. Somasundaram, “OPTIMIZATION OF KERF WIDTH OBTAINED IN WEDM OF ALUMINUM HYBRID COMPOSITE USING TAGUCHI METHOD”, ARPN Journal of Engineering and Applied Sciences, , NO. 2,,382, 2017
112. Muniappan.A, Mantri Sriram, C.Thiagarajan ,G.Bharathi Raja & T.Shaafi, “Optimization of WEDM Process Parameters on Machining of AZ91 Magnesium alloy using MOORA method”, IOP Conf. Series: Materials Science and Engineering, 390, 390,1, 2018
113. Muniappan.A, R. SATHIYARAJ, C. THIAGARAJAN, V. JAYAKUMAR & KANDYALA ASHA, “OPTIMIZATION OF WEDM PROCESS PARAMETERS USING MULTI OBJECTIVE OPTIMIZATION ON THE BASIS OF RATIO ANALYSIS”, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8, 8,133, 2018
114. Muniappan.A, Justin Arokiya Raj1, V Jayakumar1, R Shanmuga Prakash2 , R Sathyaraj1, “Optimization of WEDM process parameters using standard deviation and MOORA method”, IOP Conf. Series: Materials Science and Engineering, 402, 402,1, 2018
115. Muniappan.A, C. Thiagarajan and S. Somasundaram, “Parametric Optimization of KERF Width and Surface Roughness in Wire Electrical Discharge Machining (WEDM) of Hybrid Aluminium (Al6061/SIC/GRAPHITE) Composite using TAGUCHI-Based Gray Relational Analysis”, International Journal of Mechanical & Mechatronics Engineering, , No:01,95, 2017
116. Muniappan.A, Thunga Bharatha, S.Madhub, P.Arunagiria& G.Md Shaqiba, “Parametric optimization of WEDM control variables on magnesium AZ91 alloy by TOPSIS method”, IOP Conf. Series: Materials Science and Engineering, 390, 390,1, 2018
117. Muniappan.A, S. K. VEERABHADRARAO, V. JAYAKUMAR, C. THIAGARAJAN & A. ARUNAGIRI, “PARAMETRIC OPTIMIZATION OF WEDM PROCESS PARAMETERS ON AL/SIC/GRAPHITE HYBRID COMPOSITES USING TOPSIS METHOD”, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8, 8,138, 2018
118. Muniappan.A, C.Thiagarajan,S.Ranganathan and G.Subba rao, “Performance of wire electrode on cutting speed of machining Aluminum hybrid composite”, Journal of Engineering Technological research, , 8,25, 2017
119. Muniappan.A, D.Anandan, Dinesh Aravind, K.Dhanraj, R.Abinesh & P.Barathkumar, “Performance of wire electrodes on machining of hybrid Aluminium composite”, International Journal of Applied Engineering Research, , No.65,22, 2015
120. Muniappan.A, NA, “Running on power that's free and plentiful”, EDUCATION INSIDER, , NA,60, 2013
121. Muniappan.A, M. Ajithkumar, V. Jayakumar, C. Thiagarajan and M. Sreenivasulu, “Utility approach for multi target streamlining of process parameters in wire EDM”, MATEC Web of Conferences, 172, 172,1, 2018
122. Muniappan.A, Karthickraja, KP Harish Kumar, Jaymin Kataria, “DESIGN AND ANALYSIS OF ROLL CAGE FOR ATV”, International Journal of Applied Engineering Research, , No.65,108, 2015
123. Muniappan.A, Anandavignesh M, Aashik M S, Ajay A P & Ajithkumar.P, “HYDRAULIC & PNEUMATIC VICE AND JACK”, International Journal of Applied Engineering Research, , No.65,63, 2015
124. Muniappan.A, Antony Raj, T.T.Arjun, C.Avinash, D.Balachandar, K.Balaji, “PNEUMATIC BUMPER”, International Journal of Applied Engineering Research, , No.65,10, 2015
125. Muniappan.A, C. Arun Kumar, M. Boobalan,N.Dhenesh Kumar, G.Hari Baskar, P.Hari Haran, “Power Generation Using Shock Absorber”, International Journal of Applied Engineering Research, , No.65,16, 2015
126. Pandiyan, B.Arun kumar, P.M.Vishal ,S.Dinesh kumar,A.Siva subramanain, “OPERATOR OPTIMIZATION IN ASSEMBLY UNIT”, International Journal of Applied Engineering Research (IJAER), , Issue No.33,25554, 2015
127. Pandiyan, B.Vignesh ,B.Srinivasan , L. Vinothkumar , Suresh kumar , Tamil Selvakumar , A. Pandiyan and G.Arunkumar, “TIME STUDY OF ENGINE COMPONENTS MANUFACTURING PROCESS”, Journal of Applied Engineering Science (JAES), , Issue No.33,26666, 2015
128. Pandiyan, ARUN KUMAR. G, BASKAR. S, THEJARAM. R. S & HARSHAVARDHAN MANDATI, “AN EXPERIMENTAL STUDY ON PERFORMANCE AND EMISSION CHARACTERISTIC OF A SINGLE CYLINDER FOUR STROKE OVER HEAD VALVE (OHV) SPARK IGNITION ENGINE”, International Journal of Mechanical and Production Engineering Research and Development, 8, 4,61, 2018
129. Pandiyan, Anil Pokharel, R.Navaneethan, “Analytical and Numerical Analysis of free standing Chimney”, International Journal of Applied Engineering Research (IJAER), , Issue No.33,26263, 2015
130. Pandiyan, D.Raghunandan, Shajin Majeed, “DESIGN AND ANALYSIS OF GO-KART CHASSIS”, INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY, , Issue 11,134, 2016
131. Pandiyan, Deepak kumar.R, Jagadheesh.N, Rajasekaran.B, Suresh.T, Vinoth kumar.J, “DESIGN AND FABRICATION OF ANGLE DRESSING UNIT”, International Journal of Applied Engineering Research (IJAER), , Issue No.33,25640, 2015
132. Pandiyan, Arun Kumar, G, Amit Patel and Shaik Asif, S, “DESIGN AND OPTIMIZATION OF CRANKSHAFT FOR SINGLE CYLINDER 4 – STROKE SPARK IGNITION ENGINE USING COUPLED STEADY-STATE THERMAL STRUCTURAL ANALYSIS”, International Journal of Mechanical Engineering and Technology (IJMET), 9, 7,135, 2018
133. Pandiyan, Sarath.K, Prabakaran.S, Pravin Raj.R, Ram Prakash.E, “SEMI-AUTOMATIC SEEDS TRANSPLANTER WITH FERTILIZER”, International Journal of Applied Engineering Research (IJAER), , Issue No.65,144, 2015
134. Pandiyan, G. Arun Kumar1, B. Baskar2, A. Shajin3, A. Sathis Kumar1 and Mohammed Saleem1, “THERMAL EFFECT ON TOPOLOGY OPTIMIZED CRANK CASE COVER FOR ADDITIVE MANUFACTURING”, ARPN Journal of Engineering and Applied Sciences, , Issue.18,11098, 2016
135. Pandiyan, K.Bharath Kumar, Bibin George Thomas, Paul James Thadhani, “DESIGN AND ANALYSIS OF CONNECTING ROD USING COMPOSITE MATERIALS”, International Journal of Applied Engineering Research (IJAER), , Issue No.65,236, 2015
136. Pandiyan, Sibi Georeg K P and Shajin Majeed, “Performance Analysis of Double Spring Mass Damper System for Vehicle Suspension”, International Journal of Engineering Sciences and Research Technology (IJESRT), , Issue.11,142, 2016
137. Pandiyan, K. Naveen kumar, M. Sarath kumar, “DESIGN AND FABRICATION OF TEFLON BUSHES REPLACING GUNMETAL BUSHES ON MARINE PROPELLER SHAFT ARRANGEMENT”, International Journal of Applied Engineering Research (IJAER), , Issue No.33,25435, 2015
138. Pandiyan, S.Ponnarasu, M.Prashanth, R.Praveen, R.Razikh Farid, “FABRICATION OF SEMI-AUTOMATIC PLASTIC INJECTION MOULDING MACHINE”, International Journal of Applied Engineering Research (IJAER), , Issue No.65,148, 2015
139. Pandiyan, Ningala Rakesh, Shajin Majeed, “FATIGUE ANALYSIS OF COMPOSITE CONNECTING ROD”, INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY (IJESRT), , Issue.10,131, 2016
140. Pandiyan, Dr.G.Arun Kumar, “A Review on Design Methods for Compliant Mechanisms and Compliant Systems Used in New Age Industries”, Australian Journal of Basic and Applied Sciences (AJBAS), , Issue No.33,630, 2014
141. Pandiyan, Dr.G.Arun Kumar, “DESIGN METHODS FOR COMPLIANT MECHANISMS USED IN NEW AGE INDUSTRIES – A REVIEW”, Journal of Applied Engineering Science (JAES), , Issue 2, 374,223, 2016
142. Ravishankar, JEEVA P, SATHYA NARAYANAN, “Haptic Technology in Medical, Robotics and Industrial Field and Frabrication”, IJERAS - INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH AND ALLIED SCIENCE, 1, 6,38, 2016
143. Ravishankar, JEEVA P, SATHYA NARAYANAN, “Modification of Ferrule Locking System for Cable Assembly in Lmv”, IJERAS - INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH AND ALLIED SCIENCE, 1, 6,48, 2016
144. Ravishankar, JEEVA P, SATHYA NARAYANAN, “Catalytic Reduction of Carbon Dioxide in Exhaust Emission of Petrol Vehicles”, IJERAS - INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH AND ALLIED SCIENCE, 1, 6,45, 2016
145. Ravishankar, JEEVA P, SATHYA NARAYANAN, “Antilock Braking System (Abs)”, IJERAS - INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH AND ALLIED SCIENCE, 1, 6,50, 2016
146. Ravishankar, JEEVA P, SATHYA NARAYANAN, “Automatic Speed Control System in Four Wheelers”, IJERAS - INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH AND ALLIED SCIENCE, 1, 6,42, 2016
147. Ravishankar, JEEVA P, SATHYA NARAYANAN, “Fabrication and Reinforcement of Composite Plate Using Natural Fiber (Coir)”, IJERAS - INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH AND ALLIED SCIENCE, 2, 10,1, 2017
148. Sivananthan, R.Tharun kumar, G.Lokesh,Dr. D.Vijayaganapathy, “EXPERIMENTATION ON COMPOSITE BRAKE PADS WITH ALUMINUM REINFORCEMENT OF SIC AND FLYASH”, International Journal of Pure and Applied Mathematics, 118, 24,1, 2018
149. Sivananthan, G.Vijayasekaran, T.Santhosh kumar,, G.Viswanath, Yadhava Kumar, “BEHAVIOUR OF SILICON CARBIDE ON ALUMINIUM IN TURNING PROCESS”, International Journal of Applied Engineering Research, 10, 33,26367, 2015
150. Sivananthan, Karthik.V , K.M. Arvind, “DEVELOPMENT IN D.I. DIESEL ENGINE USING SOLENOID OPERATED SYSTEM”, International Journal of Pure and Applied Mathematics, 119, 16,4853, 2018
151. Sivananthan, Elvin Raju. Chevvakula, Yeswanth Kumar P, Dr. D.Vijayaganapathy, “INVESTIGATION OF MECHANICAL PROPERTIES FOR Al-SiC-TiB2 METAL MATRIX COMPOSITE”, International Journal of Pure and Applied Mathematics, 118, 24,1, 2018
152. Sivananthan, Karthik.V , K.M. Arvind, “SOLENOID OPERATED D.I. DIESEL ENGINE: A REVIEW”, International Journal of Pure and Applied Mathematics, 119, 16,4703, 2018
153. Suryakumari, Dr.S.Ranganathan, “Development of Aluminum Hybrid Metal matrix Composite”, ARPN Journal of Engineering and applied Sciences, 11, 12,7973, 2016
154. Suryakumari, Arup Roy, “Emission control in I.C Engines using secondary Fuel”, International Journal of pure and applied Mathematics, 119, 12,15717, 2018
155. Suryakumari, P.KUMARAN, “Multi objective Optimizaion of Dry EDM process using Grey relational Analysis”, International Journal of pure and applied Mathematics, 119, 12,15727, 2018
156. Suryakumari, Dr.S.Ranganathan, “Preparation and study the wear behaviour of Aluminium Hybrid composite”, Materials today Proceedings, 5, 5,8104, 2018
157. Suryakumari, Dr.S.Ranganathan, “Study the Vibration Analysis of an IC Engine using bio fuel blends”, International Journal of pure and applied Mathematics, 119, 12,15735, 2018
158. Suryakumari, Teppala Vikranth, “Autonomous Air and Under water vehicle”, IEEE Xplore, 9, 2,26, 2016
159. Velmurugan, pandiyan, suriyakumari jayakumar, “Modeling And Analysis Of Semi Active Hydraulic Engine Mount Using Finite Element Analysis”, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCE, 11, 16,10097, 2016
160. Velmurugan, SAI NAGENDRAN , HARSHAVARDAN, “Performance analysis of twocylinder diesel engine vibrations using different engine mountings”, IJARIIE, 3, 4,2275, 2017
161. Velmurugan, srikanth, balakrishnan, “Vibration analysis on car steering due to smooth and Rough Road Conditions”, IJTSRD, 1, 6,32, 2017
162. Velmurugan, REDDY SHARATH, NARESH, “Emission Control in Heavy Duty Diesel Engine by Using Selective Catalytic Reduction Along with ECU””, IJPAM, 119, 12,15775, 2018
163. Velmurugan, AATHRESH, MADAN KUMAR, “Experimental Analysis On Scr System For Various Emission Reduction In Diesel Engine”, IJPAM, 119, 12,15791, 2018
164. Vinodh, Ram Pradeep, Aravinth, “Analysis of Steering Knuckle of All-Terrain Vehicles”, International Journal of Mechanical Engineering Technology, 9, 2,432, 2018
165. Vinodh, Ram Pradeep, Aravinth, Dr.Vijayaganapathy, “Design and Analysis of Al7075 Steering Knuckle Components”, International Journal of Pure and Applied Science, 118, Special,1, 2018
166. Vinodh, Ram Pradeep, Aravinth, Dr.Vijayaganapathy, “Design and Analysis of SG Cast Iron Steering Knuckle”, International Journal of Pure and Applied Science, 118, Special,1, 2018
167. Vinodh, Sampath, Sanjeeth, Santhosh, Sanjeev, Vibishek, “Development of Drone with cutting arm and crop duster”, International Journal of Advanced Research (IJAR), 5, 8,17, 2017
168. Vinodh, Sai Deepak, Naga Kumar, “Performance and emission analysis of diesel fuelled with waste cooking oil bio diesel”, International Journal of Pure and Applied Science, 119, Special,15869, 2018
169. Vinodh, Karthik Mahadevan, Ganesh, “Stress analysis of Composite Helical Spring (Cr-Va + Low Carbon Steel & Cr-Va + Stainless Steel)”, International Journal of Pure and Applied Science, 119, Special,15855, 2018
170. Sadhasivam, Hari basker, “Remote controlled scissor jack to lift the vehicle”, International Journal of Advanced Research, 3, 3,1279, 2015
171. Sadhasivam, Thirumalai R, “Study of Pressure Drop, Friction Factor & Heat Transfer Characteristics of Compact Heat Exchangers using CFD”, Asian Journal of Research in Social Sciences and Humanities, , Issue : 9,192, 2016
172. Sadhasivam, saikrishna, “Development of Cranium Using Mimics and Rapid Prototyping Using ANSYS”, International Journal of Science and Research, 4, 7,79, 2015
173. Sadhasivam, Damodharan, “Verification and Fabrication of Joule–Thomson Effect”, Journal of Chemical and Pharmaceutical Sciences, 10, 1,288, 2017
174. Sadhasivam, A.H.Ansari, “Fabrication and Characterization of Hydra Pneumatic Crane”, Journal of Chemical and Pharmaceutical Sciences, 10, 1,291, 2017
175. Sadhasivam, Nithesh.P.V, “Bicycle Navigation Using HMD (Head Mounted Display)”, Journal of Chemical and Pharmaceutical Sciences, 10, 1,285, 2017
176. Sadhasivam, Jayalakshmi, “SIMULATION OF CAR BODY BY DEVELOPMENT OF STATIC AND DYNAMIC ANALYSIS”, International Journal of Automobile Engineering Research and Development, 4, 3,1, 2014
177. Sadhasivam, Pradeep ,Naresh kumar, “Design and Fabrication OF Flywheel Bicycle with Mobile Charger”, Indian journal of scientific Research, 3, 11,230, 2014
178. Sadhasivam, nareshkumar,Aravind, “DESIGN AND FABRICATION OF JIG WITH ASSEMBLY PART OF LPG VARIENT”, International Journal of Applied Engineering Research, 10, 33,25618, 2015
179. Sadhasivam, P.Bharath kumar, P.Ganesh, “COMPUTATIONAL INVESTIGATIONS ON THE EFFECT OF DELTA WINGLETS ARRANGED IN PARALYZED AND INLINE APPROACHES”, International Journal of Pure and Applied Mathematics, 119, 12,15553, 2018
180. Sadhasivam, Thirumalai R, “Experimental Measurement and Computational Investigation on the Effect of Inlet Winglet Turbulators on the Heat Exchange Behaviour of Radiator Tubes”, Journal of Applied Fluid Mechanics, 11, special issue,135, 2018
181. Sadhasivam, T.Ganesan, “Development in sail boat using" T" shaped Hydrofoil”, International Journal of mechanical Engineering and Technology, 9, 6,548, 2018
182. Sadhasivam, M.R. Nagendra1, M. Tamilselvan, “Computation and investigation of an SMA engine using low heat recovery”, International Journal of Pure and Applied Mathematics, 118, 20,52, 2018
183. Sadhasivam, Jawakar D.K, “Fabrication and Analysis in Marine Vehicle using Hydrofoil”, International Journal of Pure and Applied Mathamatics, 119, 17,3157, 2018
184. Sadhasivam, G.Manigandan and P.Kalaivendhan, “Design and Analysis of Hot Air Stirling engine heater with ANSYS”, International Journal of Pure and Applied Mathamatics, 119, 12,15819, 2018
185. Ben Mathew, V. Hemanth,A.U.V.Sai Uday , Dr.D.Vijayaganapathy, “CHARACTERISTIC EVALUATION OF FRICTION WELDED JOINTS OF 7075ALUMINIUM ALLOY”, International Journal of Pure and Applied Mathematics, 120, 6,3895, 2018
186. Ben Mathew, V. Hemanth,A.U.V.Sai Uday , Dr.D.Vijayaganapathy, “FRICTION WELDING OF 7075ALUMINIUM ALLOY”, International Journal of Pure and Applied Mathematics, 120, 6,3909, 2018
187. Ben Mathew, K.Sankara Narayanan, J.L.Miren Kisshan,, Dr. D.Vijayaganapathy, “DESIGN AND ANALYSIS OF WHEEL RIM”, International Journal of Pure and Applied Mathematics, 120, 6,3933, 2018

Scroll back to Top